Same here, I know that I have had the same issue on my wifi as people passing by my apartment in the area (I live in the downtown area of a city) have devices which automatically connect to any advertised wifi to probe for auto-connect. This is automatic for most devices (you know when you see a list of networks to chose from on your device, well they see you doing that, and this is what that looks like on the network side if connections are being displayed) and they linger for a few seconds but still show for a few minutes. If this is what is happening to yours, this is normal and they are not accessing unless they penetrate your security, which if you have modern WPA2 enabled is unlikely.
After checking my Device Details page and turning on and off all the devices on my network, I discovered that the LiteonTe devices are the SONY BluRay/DVD players that we have connected, which play DVDs but also connect to the internet to stream Netflix, HULU, Amazon and others. According to my router, I have a device on my network that's connected to my 2.4GHz ssid, but I don't recognize the name and have so far been unable to find any identifying information about it. I’m getting my solar panel system turned on next Tuesday. One of the things it will do is connect to the internet via wifi to report power generation for Solar Renewable Energy Certificates, and other stuff I guess. If I saw a device labeled “Mitsumi Electric Company” connected to my router, that’s what I would assume it was.
Use GlassWire Pro to See Who is Connected (And Get Alerts when a New Device Connects to Your Wi-Fi)We’re big fans of the firewall and security system, and one of the great features they have in the Pro version is a quick and easy Network view that shows you all the devices connected to your Wi-Fi network.isn’t just a firewall, it also has beautiful graphs to show your bandwidth usage, see what applications are connecting to what, and exactly how much bandwidth each application is using. You can get alerts when an application changes something, or when an installer tries to install a new system driver.
There are tons of features, too many to list here.But what makes GlassWire even better for today’s topic is that if you go into the Settings panel, you can actually enable alerts whenever a new device tries to connect to your Wi-Fi. Now that’s a great feature!GlassWire is, but the network device monitoring is only included in ($49 for one PC). Use Your Router’s Web InterfaceRELATED:The best way to find this information will be to check your router’s web interface.
Your router hosts your Wi-Fi network, so it has the most accurate data about which devices are connected to it. Most routers offer a way to view a list of connected devices, although some may not.The standard tips for accessing your router’s web interface apply. If you’re not sure of its IP address, you can generally. You could also run in a Command Prompt window. Next, plug this IP address into your web browser’s address bar and press Enter. This should usually bring up your router’s interface.
Unknown Device Connected To Router
If it doesn’t, check your router’s documentation — or perform a web search for its model number and “web interface” to find out how to access it. If you haven’t set a custom password and passphrase, you may need to perform a search or check the documentation to find the default ones for your model of router.Finding the List of Connected DevicesYou’ll now need to look for the option in your router’s web interface somewhere.
Look for a link or button named something like “attached devices,” “connected devices,” or “DHCP clients.” You may find this on the Wi-Fi configuration page, or you may find it on some sort of status page. On some routers, the list of connected devices may be printed on a main status page to save you some clicks.On many D-Link routers, a list of connected devices is available under Status Wireless.On many Netgear routers, you’ll find the list under “Attached Devices” in the sidebar.On many Linksys routers, you’ll find this option under Status Local Network DHCP Clients Table.On Comcast Xfinity routers, you’ll find the list under Connected Devices in the sidebar.Understanding the ListRELATED:Many routers simply provide a list of devices connected via DHCP. This means that, if a device is, it won’t appear in the list. Keep that in mind!When you get the list open, you’ll generally see similar information on every router. The interface probably shows you a table with a list of connected devices, their “host names” on the network, and their MAC addresses.RELATED:If the list doesn’t offer meaningful enough names, you may want to (also known as “computer names” or “device names”) on your computer or device’s operating systems. The host name will be visible here.
Unknown Device On My Router
Unfortunately, there’s no way to change the hostname on some devices — for example, we’re not aware of a way to change an Android device’s hostname to a more meaningful one without rooting it.When in doubt, you could always compare the MAC address seen on this page (or the IP address displayed) to the MAC address of a device you’re using to check which device is which.This List Isn’t FoolproofOf course, this list isn’t completely perfect. Anyone can set any hostname they want, and it’s also possible to. However, this would mean that a device of yours wouldn’t be able to connect to the network while another device with a spoofed MAC address was taking its place, as routers generally block two devices with the same MAC address from connecting at the same time. And someone who gained access to your router could set up a static IP configuration to be stealthy.RELATED:Ultimately, this isn’t the most powerful security feature, or a foolproof way to notice people connected to your network.
It’s not something you need to check regularly. If there are devices you don’t recognize, you can change your Wi-Fi passphrase — you’re hopefully — and that will kick all the devices off until they can provide the new passphrase.However, even devices you don’t recognize may be something you own that you didn’t remember. For example, an unknown device could be a, a Wi-Fi connected speaker system, or.Scan Your Wi-Fi Network With Software On Your ComputerThe ideal way to check for connected devices will generally be to use your router’s web interface. However, some routers may not offer this feature, so you may want to try a scanning tool instead. This is a piece of software running on your computer that will scan the Wi-Fi network you’re connected to for active devices and list them. Unlike router web interface tools, such scanning tools have no way of listing devices that have been connected, but which are currently offline. You’ll only see online devices.There are a lot of tools for doing this, but we like.
Like other NirSoft software, it’s a convenient little tool without any adware or nag screens. It also doesn’t even need to be installed on your computer. Download the tool, launch it, and it will watch your Wi-Fi network for active devices, displaying their device names, MAC addresses, and the manufacturer of their Wi-FI network hardware. The manufacturer name is very helpful for identifying specific devices without device name — especially Android devices.This tool may not work properly until you specify your Wi-Fi network adapter. On our Windows PC, we had to click Options Advanced Options in Wireless Network Watcher, check “Use the following network adapter,” and choose our physical Wi-Fi adapter before performing a scan.Once again, this isn’t something you really need to worry about constantly. If you’re using WPA2-PSK encryption and, you can feel fairly secure. It’s unlikely anyone is connected to your Wi-Fi without your permission.
If you’re concerned this is happening for some reason, you an always just change your Wi-Fi’s passphrase—you’ll have to re-enter it on all your approved devices, of course. Be sure WPS is disabled before you do this, as.Changing your Wi-FI passphrase can also be a good idea if you’ve given out your Wi-FI password—to neighbors visiting you, for example—and want to be sure they don’t continue using it for years.